| Customization: | Available |
|---|---|
| Additional Capabilities: | Milling, Drying, Coating |
| Application: | Liquid with Suspended Solids, Powder, Viscous Fluid, Liquid, Granules, Powder |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This horizontal double ribbon mixer consist of horizontal U-shaped tank, top cover with (or without) openings, single shaft equipped with double layers ribbon mixing agitator, transmission unit, support frame, sealing element, discharge structure and so on. Ribbon blades are always two layers. Outer layer ribbon make materials get together from two ends to center and inner layer ribbon make materials spread from center to two ends. Materials forms vortex during repeatedly movement and homogeneous mixing are achieved.
Features
1. With wide application range,it can mix powder and powder or powder and liquid, and can also be used as reaction equipment and drying equipment.
2. Good mixing evenness. It can evenly mix material with a proportion of 1:10000, and can display more prominent adavantage when mixing materials of different specific gravites.
3. Sof mixing process and low crushing.
4. Through speical design, the equipment conforms to GMP requirements.
5. Fast mixng speed and high efficiency.
6. High loading coefficient and low energy consumption.
7. Fast and convenient discharging. A batch of materials are generally discharge within2~5 minutes.
8. The equipment runs stably and reliably, featured by low consumption of parts, long service life, convenient maintenance and simple operation.
More detailed information
1. Material: stainless steel 304 / 316L or mild steel Q235
2. Surface treatment: paint (mild steel), polish/sandblasting (stainless steel)
3. Ribbon agitator: double layers & double directions
4. Mixer tank: horizontal, U-shaped tank
5. Shaft: horizontal, hollow, integral single shaft
6. Mixing time: 5-15 minutes
7. Working model: batch mixing
8. Speed reducer: cycloid reducer
9. Rotation speed: fixed speed
10. Main shaft seal: (Teflon) stuffing seal or air purge seal
11. Openings: feeding inlet, manhole, and inspection / connection port
12. Discharge valve: pneumatic or manual flap discharge valve
13. Working condition: NPT (normal pressure and temperature)
14. Not heavy duty: mixer can not be started with loading materials
15. Power supply: 220V 50HZ single phase/ 380V 50HZ 3 phase
16. Non ex-proof electronics (motor, electronic elements, control cabinet)
Application
The ribbon mixer is widely applied in medicine, food, fine chemical industry, petochemical industry, pesticide, paint, cosmetics, plastics, pigment, feedstuff and other insustries.
| Type | Total volume | Working volume | Dimension | Net weight | ||||
| M³ | FT³ | M³ | FT³ | A | B | C | kg | |
| 42A-1/4 | 0.008 | 0.28 | 0.0056 | 0.196 | 700 | 232 | 500 | 70 |
| 42A-1/2 | 0.028 | 1 | 0.02 | 0.7 | 1030 | 559 | 550 | 130 |
| 42A-1 | 0.05 | 1.8 | 0.035 | 1.3 | 1050 | 600 | 700 | 260 |
| 42A-5 | 0.2 | 7.1 | 0.14 | 5 | 1700 | 1000 | 1030 | 450 |
| 42A-10 | 0.37 | 13.1 | 0.26 | 9.2 | 2200 | 1020 | 1000 | 600 |
| 42A-18 | 0.6 | 21.2 | 0.42 | 15 | 2500 | 1100 | 1130 | 1000 |
| 42A-25 | 0.85 | 30 | 0.6 | 21 | 2550 | 1250 | 1200 | 1400 |
| 42A-36 | 1.15 | 40.6 | 0.8 | 28 | 3010 | 1810 | 1200 | 1800 |
| 42A-52 | 1.57 | 55.4 | 1.1 | 39 | 3100 | 1950 | 1350 | 2200 |
| 42A-62.5 | 2 | 70.6 | 1.4 | 49 | 3400 | 2000 | 1800 | 2900 |
| 42A-71 | 2.25 | 79.5 | 1.6 | 56 | 3800 | 2180 | 2130 | 3300 |
| 42A-80 | 2.5 | 88.3 | 1.8 | 62 | 3950 | 2180 | 2130 | 3300 |
| 42A-100 | 3.1 | 109.5 | 2.2 | 77 | 4210 | 2300 | 2210 | 4262 |
| 42A-120 | 3.7 | 130.7 | 2.6 | 92 | 4257 | 2380 | 2210 | 4262 |
| 42A-155 | 4.7 | 166 | 3.3 | 116 | 4350 | 2650 | 2240 | 5700 |
| 42A-180 | 5.5 | 194.2 | 3.9 | 136 | 4900 | 2870 | 2280 | 7600 |
Packed by wooden case usually.
According to customer's requirement, other packaging is available as well.
Shipping:
European Countries: 22-28 days
United States: East --13-16 days, West--21-28 days
Brazil: 30-40 days
Russia: 36 days
Asia Countries: 3-5days
Our Services:
Pre-sales service:
1> Engineering design
2> Equipment model selection guide
3> equipment machinig
After-sales service:
1> one year from date of delivery, if any spare parts be broken within warranty and not caused by improperly operation, we would offer the new parts for free.
2> Provide professional after-sales service engineers to abroad installation and debugging.
company information:
Jinzong Machinery is a manufacturer of processing machines ( crusher,reactor, mixing tank, high speed disperser, sand mill, filling machine , paint&coating production line) for chemcial industry with more than 20 years experiences and best service in China, which covers an area of 1,7000 square meters, has 5 workshops now.
1.Why do you choose us?
·High quality and competitive price.
·Approved by ISO, CE, GS and etc.
·One year warranty; perfect after-sales service for spare parts.
·Easy maintenance.
2.What kind of machines can you supply to customer?
We could offer various kinds of machines and whole production line.
(1) paint&coating production line
Intelligent nano sand mill
Horizontal disc sanding machine
Basket sand mill
High speed disperser
Platfrom type disperser with several vessles
Water-based high efficiency paint unit
Planetary mixer&extruder
Filling machine
Bag filter
Water treatment equipment
Crusher
Double-cone powder mixer
Screw type mixer
(2)Resin complete production equipment
(3) Automatic control system
(4) Adhesive products:
Our Certificates
Choose JINZONG, choose contentment
Please contact me if you are interested and have any questions
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
){kind=link}