Hot Gule Ointment Paste Reactor with Heating and Stirring Systems
Hot Glue is a kind of synthetic resin plaster matrix, which is clinically used to make various plasters, especially in industrial production. Color, oil content, containing hot melt adhesive, heated into filamentous shape. There is no residue of matrix on the skin. When you buy it, you can directly heat it and melt it. Add the powder to spread the plaster. Simple, practical and convenient. The utility model reduces the oil fume pollution and time-consuming and laborious caused by the doctors themselves.
Plaster is a traditional external medicine in China. It is usually made of medicinal materials, edible vegetable oil and red lead. It is mounted on the beach. It can penetrate the tissue more than paste and ointment, with mild and lasting effect, small toxic and side effects, many indications and convenient use. It is a good method of medication and treatment.
But the development of plaster is only in the original state.
The reasons are as follows:
1, The original plaster has high technical requirements and great difficulty. It is manifested in the mastery of the refining temperature, the suitability of refined oil, the mixing amount of lead and the mixing time are controlled by experience. There are many unstable factors. A little carelessness will lead to the inability of plaster to use, mass production and clinical application.
2, The efficacy of the original plaster is low. This is because in the past, the effective components of drugs were destroyed in the reaction between oil and lead at the high temperature of oil refining.
The new plaster preparation method has the following advantages
1, The preparation technology of plaster is simple and controllable, and can be mass produced. The new method is to make the required drugs into fine powder and combine them under certain conditions. There is no need to use a large amount of vegetable oil and lead, let alone react at high temperature, which is convenient to make.
2, Plaster is effective in treating diseases. The new preparation method does not destroy the effective components of the drug and preserves the drug properties to the greatest extent.
3, The plaster made by the new method has stable performance. It has strong adhesion, does not move, does not flow, and is not affected by external temperature and time. It can be removed and stuck at any time to maintain good curative effect for a long time.
In conclusion, the new preparation method is more convenient than ointment, with excellent efficacy and great market potential.
Product advantages:
1: Motor reducer
2: Material: SUS304 stainless steel or SUS316L stainless steel is used for all parts in contact with materials
3: Thickness of Cylinder plate: ≥ 8mm to ensure the strength of cylinder
4: Polishing accuracy: ≥ 200 mesh
5: Shaft seal: three-layer special seal structure to ensure vacuum and no filler wear black particles enter the cylinder block
6: The balance structure technology of Japanese vacuum box is introduced to ensure the same vacuum degree inside and outside the cylinder
7: Bore the shaft hole of the cylinder block as a whole to ensure the concentricity of the mixing paddle
8: Vacuum degree: ≤ -0.096mpa
9: Pressure test of clamp cylinder: ≥ 0.04MPa
10: Casing pressure test: ≥ 0.06mpa
11: Bearing
12: The jacket is equipped with multi-layer guide stiffeners to ensure the strength of the cylinder block and uniform heating / cooling
13: Frequency converter
14: Electrical control
15: Safety control
){kind=link}