Disinfectant Liquid Production Line

• Type: Disinfectant Making Machine
• Finished Dosage Form: Liquid
• Precision: High Precision
• Certification: CE, GMP, ISO
• Voltage: Customized
• Computerized: Non-Computerized
• Customized: Customized
• Condition: New
• Warranty: 1 Year
• Capacity: 1 Ton-50 Tons/Day
• Name: Disinfectant Liquid Production Line
• Transport Package: Plywood Case
• Trademark: Jinzong
• Origin: China
• Production Capacity: 100sets/Month

Product Description

Disinfectant Liquid Production line


1.RO water treatment unit
*Description:
The water treatment machine is suitable for such industries as cosmetics, pharmacy, food and electronics has been deeply favored by users for its stable water quality and simple operation.
The system solves the troubles of frequent regeneration and cleaning during the use of ion exchanging water purifier. By adopting physical principle, it enables the water to pass the reverse osmosis film with a diameter of one ten-thousandth of a micron and separates impurities, ion, microbes and colloids in the water, so as to meet the water requirements in cosmetics industries.
Reverse osmosis process uses semi permeable spiral wound membranes to separate and remove dissolved solids, organic, pyrogens, sub micron colloidal matter and bacteria from water. Feed water is delivered under a pressure of approximately 16 kg/cm2 through reverse osmosis membranes. Water permeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to drain. Reverse osmosis is capable of removing 90%-99% of total dissolved solids (TDS), 99% of organic, including pyrogens, and 99% of all bacteria in the feed water.
According to the customer's local water testing report,we adopt different equipments to produce drinking water of pure water or mineral water,etc.

*Features:
1. Continuous production, no need to regenerate, reduce labor intensity;
2. High efficiency, fully automatic operation, easy to operate and maintain;
3. Online conductivity monitoring to ensure that the water output meets the requirements;>
4. Can remove organic matter and bacteria more than 98 %;
5. If the original water quality is poor or the water demand is high, JRO reverse osmosis can also be connected with ion exchange equipment to ensure various water requirements.
6. Can add anion & cation mixing bed,EDI,UV lamp,etc..

*Model select
Technical Specification

Model	Productivity(t/h)	Power(kw)	Recovery rate(%)	Desalination rate(%)
JRO-0.5	0.5	1.5	50	97
JRO-1.0	1.0	1.5	50	97
JRO-2.0	2.0	1.5	70	97
JRO-3.0	3.0	2.5	75	97
JRO-5.0	5.0	5.5	75	97
JRO-6.0	6.0	5.5	75	97
JRO-8.0	8.0	7.5	75	97
JRO-10.0	10.0	7.5	75	97

Application
*Application
Chemical industry, power plant desalination water, electrodeionization ultra pure water, medical industry, aviation cleaning, food and beverage industry, municipal heating,
softened circulating water, living water purification, brackish water desalination, sea water desalination,industrial waste water treatment, reclaimed water reuse, rural area drinking water project, pharmacy inductries,etc.

2.Disinfectant making mixing tank
JY Disinfectant making mixing tank can divided  to JYA normal type and JYB vacuum type according to the main boiler's basic structure. The mixing type has the multi-level mixing blade&frame wall-scraping mixing blade and other combinations .And can also add the AES self-absorption dissolving decollators or homogenizer accordingly customer's requirement.
The series of products have the mixing paddles of many structural shapes for choice ,and the vessel body has many shapes such as normal temperature, heating, normal pressure and vacuum, the product has the advantages of high productivity, low energy consumption ,strong adaptability and broad usages, and is the ideal equipment to produce liquid washing prodcuts.


Disinfectant making mixing tank Technical Specification

Model	Volume of Main Pot	Mixing motor		(L*W*H)mm Dimension	Weight (kg)
		Power (kw)	Speed (rpm)
JY-200	260	2.2	0-74	2000*2000*2650	1600
JY-300	375	3	0-74	2100*2100*2750	1900
JY-500	620	4	0-63	2250*2250*3050	2500
JY-1000	1250	5.5	0-50	2600*2600*3500	4000
JY-2000	2600	7.5	0-42	2800*2800*4000	6000
JY-3000	3800	11	0-42	3000*3000*4200	9000
JY-5000	6500	15	0-42	3300*3500*4800
JY-10000	12500	22	0-30

Disinfectant making mixing tank Application
* Disinfectant making mixing tank Application:
It is suitable for manufacturing products in cosmetic and food area. In food, like jalapenos, mayonnaise, chocolate, etc products. In cosmetic, like shampoo, liquid soap, shower gel, etc. It integrates mixing, homogenizing, heating, cooling, pump discharging finished products and defoaming(optional) functions. It is the ideal equipment for liquid products in domestic and international factories. The pot body is welded by three-layer stainless steel plate. The tank body and the pipes adopt mirror polishing, wahich fully conforms to GMP requirements. According to customer requirement, the tank can heat and cool materials. The heating way including steam heating and electric heating, Easy to discharge, bottom discharge or by transfer pump.

*In general, Disinfectant making mixing tank application products as following:
Shampoo, liquid soap, bath shower gel; Dish washing, hand washing, lubricating oil; AES,AESA,LAS materials; jalapenos, mayonnaise, chocolat; All kinds of daily chemical liquid wash products.


3.Disinfectant Automatic filling packing line

Disinfectant 6 head piston filling machine technical parameters: 4Nozzle for 500ml

1. Filling nozzle: 6/4
2. Filling volume:10-100ml /100ml-1L
3. Filling speed: 30-40BPM based on 50ml bottle
4. Filling precision: ±1%
5. Frame material: 304 SUS
6. Program control: PLC+ touch screen
7. Filling nozzle, tank, parts connected with liquid: 316#, silica gel, POM
8. Air pressure: 0.6-0.8Mpa
9. Conveyor: 82mm POM chain belt, 0-15m/min, H: 800±25mm
10. Conveyor motor: 750W frequency speed governing motor
11. Power: 2.2KW, 380V, three phase five wire
12. Tank: 150L, with liquid level, the input pipe installed into the bottom to prevent foam

Disinfectant bottle 4 wheel screw capping machine technical parameters:

1. Suitable bottles: According to customer samples
2. Cap distributor: Vibration shaking plate
3. Capping way: Electric screw capping
4. Capping speed: 40-50BPM
5. Conveyor: Share with filling machine
6. PLC + touch screen: Share with filling machine
7. 7. Power: 200W, 220V

Disinfectant bottle Labeling machine technical parameters:

1. Suitable bottles: According to customer samples
2. Suitable label: Sticker roll label, not transparent
3. Capacity: >50BPM
4. Labeling precision: ±1mm
5. Conveyor: 82mm POM chain belt, 0-15m/min, H: 800±25mm
6. Power: 220V, 600W
7. Program control: PLC + touch screen
8. Roll label inner diameter: 76mm, Max outer diameter: 300mm

  Main Configuration:

1. Frame, under-chassis, guard rail: 304 SUS
2. Filling nozzle, tank, parts connected with liquid: 316#, silica gel, POM
3. Pneumatic component: Taiwan AIRTAC
4. PLC + touch screen: Siemens
5. Sensor: German LEUZE
6. Converter: Schneider
7. Conveyor: 82mm chain belt, AC motor
8. Exposed parts: stainless steel, anodized aluminum alloy, electroplated 45 # steel, plastics.

5. Packaging & Shipping

Packaging
1> Outer packing: plywood case
2> Inner packing: PE film wrapping overall

6.Our Services

 -Engineers avaiable to service machinery  overseas

- Technological support

- Guarantee: 1 year

- Custom-make is ok for us

6.1. Pre-sale service

Act as good adviser and assisant of clients enable them to get rich and generous returns on their investments.

a. Select equipment model

b. Design and manufacturer products according to client's special requirements.

c. Train technical persnonal for clients

6.2. Service during the sale

a. Pre-check and accept products adhead of delivers

b. Send photos of machines every week and send testing video

c. Help clients to draft solving plans

6.3. After-sales services

Provide considerate services to minimize client's worries

a. Assist client to prepare for the first project.

b. Install and debug the equipment

c. Train initiative to eliminate the trouble rapidly

d. Provide technical replacement

e. After-sales team will solve problems via operating and provide technical instruction

6.4. Warranty

The warranty is 12 months

Within 12 months after equipment sold, we will provide you with parts for the damaged parts(except the demages caused by wrong operation)free of charge

We will deliver t he necessary parts via express by air or sea free of charge wihthin 12 months.
 

7.Company Information:
We are a professional manufacturer of  cosmetic,chemical& pharmaceutical machinery and equipment more than 20 years .Product lines range from:

1> Chemical Machinery:  reactors, resins production line, high speed disperser, storage tank, sand mill, three rollers mill, filter, filling macihne, paint&coating production line,paint testing machines, etc.
2> Cosmetic Machinery: water treatment ,vacuum emulsifying machine,liquid detergent mixing machine,storage tank,solid soap making machine,perfume making machine, filling machine etc.
3> Pharmaceutical  Machinery: vacuum ointment machine,sanitary stainless reaction pot,alcohol deposition can, collocation tank etc.